Why Does My Carpet Look Wrinkled?

If you see your carpet looking wrinkled and loose, don’t panic. “Why does my carpet look wrinkled?”, you might ask. A re-stretch done by a professional can make your carpet good as new. Before you have your carpet get a refreshed look, let’s try to find out what causes wrinkling and how to get ripples out of carpet.

Improper Installation or Padding

If you see carpet wrinkles and ripples, it can be due to loosened areas in the carpet brought by improper installation. This is why installing the carpet properly is important and done with the help of a professional who knows how to apply proper techniques using the right tools.

Why Does My Carpet Look Wrinkled
Why Does My Carpet Look Wrinkled
Professionals know how to get ripples out of carpet even for low pile carpet types by using power stretchers or poles during installation. These tools are effective in stretching the carpet to both ends of your walls. If a knee kicker will be used for carpet installation, then the desired results based on the manufacturer’s specifications may not be observed.

Carpet Wrinkles

Improper padding can also cause carpet wrinkles. Carpets with low quality have a cheap upfront cost but later on, you’ll end up spending more just to get rid of carpet wrinkles. Before learning how to get wrinkles out of carpet, always check the manufacturer’s specifications for padding because it varies depending on its purchased type. Improper padding may even have the warranty of your carpet voided.

Over-wetting and Delamination

Flooding or moisture under your carpet can lead to over-wetting. If you ever wonder “Why does my carpet look wrinkled even when installed correctly?”, then improper cleaning can be one factor. When learning how to fix carpet wrinkles, consider professional carpet cleaning to avoid issues like this.
Delamination also causes wrinkles and this happens when the carpet and the backing get separated. It can be a manufacturing concern, so file for a warranty claim immediately when you observe this problem.
Moisture is another factor that can be a product of flooding or improper cleaning, so you need to know how a steam cleaner works to use it properly. It happens when vapor from a concrete slab goes through the holes in the moisture barrier. Delamination couldn’t be solved by re-stretching so other methods on how to fix carpet wrinkles and flatten wrinkled carpet can be used instead.
Carpet Wrinkles
Carpet Wrinkles

Temperature and Humidity

High temperatures such as those that are above 85 degrees Fahrenheit can cause your carpet to wrinkle. Avoid exposing your home or room to such high temperatures to avoid wrinkling.
Another factor is humidity especially during the time when the carpet was installed. The flooring materials to be used should first be acclimated to the environment to avoid wrinkled carpet problems.
You already have “Why does my carpet look wrinkled?” answered so always do research on what resources you need to buy and be guided by the manufacturer’s specifications. Removing stubborn carpet stains is hard, and so does getting rid of carpet wrinkles. Remember that carpet installation professionals are available for consultation on how to get wrinkles out of carpet. You’ll know who to call when a DIY carpet project to flatten wrinkled carpet gets too challenging to handle.

How to Fix Melted Berber Carpet

If you’ve found out that patches of your carpet that look burnt and melted, then there are many potential causes. Ironing and lighting a candle are two of the most common. A melted carpet needs to be repaired early, otherwise lasting damage could be inflicted.
Before continuing, please be aware that contacting a professional is always the safest method for repairs.

How to Fix Melted Berber Carpet

If you’re wondering how to fix burn holes in carpet, then you’ll want to know what steps you should take. Repairing carpets quickly is the best way to prevent further problems in the future. Below, you’ll learn how to fix melted Berber carpet.
How to Fix Melted Carpet

How To Fix Burned Carpet With Small Burns

To learn how to get burns out of carpets that are in smaller patches, you should follow the instructions below.
First, you’ll want to take some sandpaper and rub it across the patch of burnt carpet. You’ll then want to use a pair of scissors to cut away the fibers that are melted. After that, you should check to make sure all the remaining areas on your carpet are free from burn marks. Then, you’ll want to find some unharmed fibers on your carpet that are in an obscure area. Cut these up and glue them into the place where you removed the burnt fibers. If you need to trim them to fit, do so.
This is a simple way to learn how to fix carpet burns, but if you have big sections of carpet that have melted, then there will be some additional steps to follow. These may also vary depending on your carpet type.

How To Fix Melted Carpet With Large Burns

If you’ve been thinking about how to fix melted Berber carpet, but the job seemed too tough, you’ve come to the right article. Here is what to do.
Use a knife to carve away the section of the carpet that is burnt. Do your best not to damage the padding or underlay.
Use a vacuum cleaner to take away any or all stains and dirt particles. You may also like to follow some cleaning tips when you do this. If you have a spare carpet, you should use the fibers from this so you can learn how to fix melted Berber carpet.
Use the section of melted carpet to mark out the dimensions of the area you need to replace. Then use the new piece of carpet taken from a spare roll or purchased roll and trim it to size using scissors.
How to Fix Melted Berber Carpet

How to Fix Melted Berber Carpet

Use carpet glue to adhere the patch into the area that was cut away, and then place something heavy on top so that it sticks properly. This will take around 24 hours. After this period, brush the fibers with a comb.
That’s all you need to know. Now that you’ve read this article, you should find it much easier to fix burned carpet. Contacting a professional is always the safest method for repairs.

How Do You Remove Stubborn Stains From Carpet

If you have a carpet, it seems that stains are inevitable. Whether it be some ketchup, wine or a little present from your cat, chances are you have to deal with stains at some point. While some stains are easy to get rid of, others can be tough. So how do you remove stubborn stains from carpet?

How Do You Remove Stubborn Stains From Carpet – How do you get deep dirt stains out of carpet?

How Do You Remove Stubborn Stains From Carpet
How Do You Remove Stubborn Stains From Carpet

Whether you have low pile carpets or high, it is important to know how to remove stains. In this post, we’ll highlight a few tips on removing stubborn stains from your carpet. These are simple DIY cleaning tips using products that you can find in your house.

What You Need to Know Before You Start

As a general rule of thumb, removing carpet stains involves blotting the stained area, dry working from the outside in then rinse the area thoroughly with clean water before blotting again. To avoid ruining your carpet fibers, never scrub the carpet. 

Water Soluble Stains

These include:

  • Washable ink
  • Mud
  • Wet or latex paint
  • Milk
  • Jelly
  • Ice cream
  • Gravy
  • Food dyes
  • Excrement
  • Colas
  • Berries
  • Alcoholic beverages

Steps

Use a simple cleaning solution made up of 1/4 tsp of white vinegar (or non bleach detergent) mixed with 32 ounces of water.

Special Water-Soluble Stains

How Do You Remove Stubborn Stains From Carpet
How Do You Remove Stubborn Stains From Carpet
  • Wine 
  • Vomit
  • Tea
  • Mustard
  • Coffee
  • Chocolate
  • Blood

Try one tbsp. of ammonia mixed with a cup of water (for wool and wool products use water and mild detergent instead). Alternatively, try a solution made of five parts water and one-part chlorine bleach, but only on carpets such as polypropylene that have been dyed in carpets. Bleach will likely damage other types of carpets so if you’re not sure about the type of carpet you have, check with the manufacturer.

Fat, Wax and Oil

Cover the stained area with a paper towel then iron on a warm setting. Doing so should make the oil, fat or wax stick to the paper towel and come up off your carpet.

Cigarette Burns

You can get rid of cigarette burns by gently rubbing the pile of your carpet with a dull knife or with the edge of a hard and flat surface.

Glue

Moisten a soft cloth or cotton ball with rubbing alcohol and press it on the affected area. Once the glue has been thoroughly moistened, gently wipe it off then repeat the process until the stain is no longer visible.

Wax and Gum

Freeze the wax or gum with ice before using something blunt such as a spoon to shatter it. Vacuum the carpet before the pieces soften then use a white towel to blot the carpet.

Nail Polish

Dip a rag in nail polish remover then use it to blot the area. You can also use a steam cleaner to remove nail polish. 

Bottom Line

With the tips mentioned, you can now answer the question; how do you remove stubborn stains from carpet? It’s also important to invest in carpet maintenance so it can serve you better for longer. Even if you don’t have any stubborn stains to get rid of, make sure your carpet is thoroughly cleaned every 12 to 18 months. If you need to clean your carpet or tile, our experts here at Knights Carpet Care can assist you. 

How A Steam Cleaner Works

Steam cleaning has grown in popularity over the years, but most people still don’t quite understand how a steam cleaner works and why it’s considered to be one of the most advantageous cleaning methods.

How a Steam Cleaner Works

How A Steam Cleaner Works

What Is Steam Cleaning?

Steam cleaning uses vapor steam to clean, disinfect or sanitize, and remove a buildup of stains. Steam cleaners are ideal for hard surfaces, such as tile, grout and sealed floors, as well as cleaning of soft materials such as upholstery and carpets. These machines generate high temperatures that kill fungi, bacteria, mold and other allergens.

Steam cleaners heat water in a boiler. The boiler then converts the liquid to vapor before exiting the machine through a nozzle. The steams purpose is to loosen dirt on hard surfaces as well as in soft fibers such as upholstery and carpet, making it easier to wipe or vacuum the dirt. Some steam cleaners work with detergents and cleaning solutions while others include vacuums.

Critical Components of a Steam Cleaner

Boiler

As the name suggests, the boiler boils water and turns it into steam. Boilers ensure extreme pressure and heat, which makes it necessary for high-end versions to be made of stainless steel. Some boilers feature a heating element that you can easily replace, which makes it possible to replace a single heating rod at a low cost rather than an entire boiler. Industrial steam cleaners have boilers that are up to about 15 liters in capacity.

How a Steam Cleaner Works

Refill Tank

Most commercial or industrial-grade steam cleaners and some residential models contain refill tank that’s non-pressurized to allow you to add water to the cleaner while it’s still running. If you have a system that doesn’t have a refill tank, then you’ll always have to depressurize the system before adding any water to the boiler then giving the boiler some time (about 20 minutes) for it to heat the water.

Automatic Refill

Some industrial grade steam cleaners are equipped with a direct water feed designed to connect the boiler to a water outlet to refill it as needed. (You also have the option to refill an automatic refill system manually if you don’t have a water line, for example.)

Detergent Tanks

These tanks contain cleaning chemicals and dispense them as needed. Some steam cleaners have simple hand controls that allow you to control the flow of steam and the detergent while cleaning. Some industrial-grade steam cleaners are equipped with detergent tanks that are up to 20 liters in capacity.

Steam Vacuum

Some steam cleaners have vacuums that can automatically empty their contents into extraction tanks that are up to 20 liters in capacity.

These types of steam cleaners can save time and boost productivity as they allow you to clean as well as extract without using towels. Non-vacuum steam cleaners, however, require that you use a towel to get rid of the residue and moisture left behind after the cleaning process.

Bottom Line

How a steam cleaner works is really quite simple. The heat of steam loosens up dirt and grime, making it easy to wipe the dirt with a piece of cloth.

How to Remove Baking Soda Residue From Tile

There is no doubt that you would like to keep your bathroom clean and sparkling at all times. This will happen only when the walls are clean and sparkling. Tiling is common for any bathroom and it is essential to make it useful and also to make it look clean. However, tiling often leaves behind remnants of grout which is used to fill in the spaces between the tiles. Unless the grout is cleaned, it will look dirty and spoil the entire bathroom in terms of looks and appearances. In this article, we will go over ways and means by which you know how to remove baking soda residue from tile.

How to Remove Baking Soda Residue From Tile

Removing Baking Soda Residue from Tile

Early Treatment

If you come across haze during the first few days of installing the tiles, you can perhaps have the grout residue cleaned without the use of chemicals. You can use plain warm water to clean it. You could soak a sponge in warm water and squeeze the excess water out. You must then scrub the tile with the sponge using medium pressure. Once the scrubbing has removed the grout residue, you could use a clean rag and dry the area.

When you’re running your hands over the grout, it should be smooth. This would mean that the grout residue has been removed completely. If there is coarseness, then you can be sure that there is still some grout residue left behind. In the worst case scenario, you might have to opt for a more aggressive tactic such as contacting a professional cleaning service. Regardless of how tough the residue may be on your tile, cleaning experts at Knights Carpet Care offer premier cleaning, upholstery, and tile and grout cleaning services that can help.

Vinegar Could Help

Vinegar is often considered to be a common household product that could become a quality cleaner. It can cut through dirt and grime easily. Hence, it is commonly used for cleaning grout residue off of tiles. You could take 50% water and 50% vinegar and mix it up. You should then pour the mixture on the tile and allow the water and vinegar solution to work on the grout residue. It should be left that way for a minute or two at the most. You could then clean the tile with a dry rug. This should remove the grout residue, and if it does not happen then you may have to look for something stronger.

Chemical Reaction

While keeping strong cleaners away is recommended, it may be necessary to use them once in a while. Strong chemical cleaners could eat away the grout apart from not being very environmentally friendly. You could try using water, vinegar and baking soda in combination. In a bowl with baking soda, you have to had water and make a smooth paste out of it. You must then apply it using a dry sponge. Dry water spray bottle with vinegar could be used and the same could be sprayed on the area. A combination of vinegar and baking soda will cause the solution to bubble which would remove the grout residue. You can remove the same with a damp rag.

Summary

If you’re looking for ways on how to remove baking soda residue from tile, all that you’ll need to do is create a vinegar and water solution, or another baking soda solution with vinegar and water. Removing baking soda residue is essentially the same as removing any other substance from grout. Therefore, there’s no need to worry if you’re looking for ways to make your tile sparkling again.

Low Pile Carpet Types

Understanding the options at your disposal is crucial when shopping for low pile carpet types. These types of carpet are further classified by their texture, build quality (construction), their ability to resist stains, the type of carpet fiber used, and the dying method used to color them. Here is what you need to know about low pile carpet types.

Low Pile Carpet Types

Fiber Type

Low pile carpets are classified by the type of carpet fiber used in their construction. Here, you have options such as nylon, wool, polyester, and olefin. Each of these carpet fibers have their advantages and disadvantages. For instance, woolen carpets are naturally gorgeous and soil resistant, but they stain too easily. Olefin is highly moisture resistant but scores low when it comes to durability. Polyester looks and feels luxurious, and although it offers a wide range of colors and styles, it is not nearly as durable as nylon. Nylon, is by far the best type of carpet fiber for heavy traffic.

Construction

The majority of carpets designed for residential use are created using a tufting machine. A tufting machine can be described as a large type of sewing machine that loops hundreds of fiber strands onto the carpet backing. This results in the formation of the plush side of your carpet.Low Pile Carpet Types

Tightly twisted carpet yarns make the carpet more durable and resistant to matting. The most tightly twisted low pile carpet type is frieze, which has about 9 twists per inch. Cut pile carpets are have the loosest twists, and although this makes them feel softer to the touch, it also makes them susceptible to unraveling.

Another way to distinguish a properly made low pile carpet from a poorly made carpet is by checking the fiber density. The more tightly packed the looped carpet fibers are, the better it handles wear and tear.

Texture

Carpet textures differ a great deal because of the type of fiber used, but they are also greatly affected by the construction technique used to manufacture them. For instance, cut pile carpets feel softest because their yarns are cut at the ends. Types of cut pile carpets that you might be familiar with include shag carpets, frieze carpets, velvet carpets, cable carpets, and Saxony carpets, all of which have mildly different textures.

Looping fibers onto the carpet backing results in loop carpets, which consist of uncut fibers that can be densely or loosely spaced depending on the quality of the carpet. Cut loop carpets contain a mix of cut pile and looped fibers, which is done to create patterns on the carpet’s surface. They are marginally less durable than loop carpets.

Stain Resistance

The type of carpet fiber you settle for will determine the level of stain resistance your carpet will have. However, carpets these days come with additional stain prevention treatments which are added after their construction. These can enhance any type of fiber’s stain resistance properties.

Dye Technique

Low pile carpet types are also categorized by the method of dyeing used to color them. Continuous dyeing is mostly used on woven carpets during the post-tufting process. It is a reliable method for achieving nice, solid colors. Solution-dyed carpets usually have their fibers dyed before they’re woven together. As a result, they are slightly more resistant to staining and will not fade easily even when you use harsh cleaners on them.

There are many different types of low pile carpets. Making sure you understand the fiber type, construction, texture, stain resistance, and dye technique are very important.