There is no doubt that you would like to keep your bathroom clean and sparkling at all times. This will happen only when the walls are clean and sparkling. Tiling is common for any bathroom and it is essential to make it useful and also to make it look clean. However, tiling often leaves behind remnants of grout which is used to fill in the spaces between the tiles. Unless the grout is cleaned, it will look dirty and spoil the entire bathroom in terms of looks and appearances. In this article, we will go over ways and means by which you know how to remove baking soda residue from tile.
Removing Baking Soda Residue from Tile
Early Treatment
If you come across haze during the first few days of installing the tiles, you can perhaps have the grout residue cleaned without the use of chemicals. You can use plain warm water to clean it. You could soak a sponge in warm water and squeeze the excess water out. You must then scrub the tile with the sponge using medium pressure. Once the scrubbing has removed the grout residue, you could use a clean rag and dry the area.
When you’re running your hands over the grout, it should be smooth. This would mean that the grout residue has been removed completely. If there is coarseness, then you can be sure that there is still some grout residue left behind. In the worst case scenario, you might have to opt for a more aggressive tactic such as contacting a professional cleaning service. Regardless of how tough the residue may be on your tile, cleaning experts at Knights Carpet Care offer premier cleaning, upholstery, and tile and grout cleaning services that can help.
Vinegar Could Help
Vinegar is often considered to be a common household product that could become a quality cleaner. It can cut through dirt and grime easily. Hence, it is commonly used for cleaning grout residue off of tiles. You could take 50% water and 50% vinegar and mix it up. You should then pour the mixture on the tile and allow the water and vinegar solution to work on the grout residue. It should be left that way for a minute or two at the most. You could then clean the tile with a dry rug. This should remove the grout residue, and if it does not happen then you may have to look for something stronger.
Chemical Reaction
While keeping strong cleaners away is recommended, it may be necessary to use them once in a while. Strong chemical cleaners could eat away the grout apart from not being very environmentally friendly. You could try using water, vinegar and baking soda in combination. In a bowl with baking soda, you have to had water and make a smooth paste out of it. You must then apply it using a dry sponge. Dry water spray bottle with vinegar could be used and the same could be sprayed on the area. A combination of vinegar and baking soda will cause the solution to bubble which would remove the grout residue. You can remove the same with a damp rag.
Summary
If you’re looking for ways on how to remove baking soda residue from tile, all that you’ll need to do is create a vinegar and water solution, or another baking soda solution with vinegar and water. Removing baking soda residue is essentially the same as removing any other substance from grout. Therefore, there’s no need to worry if you’re looking for ways to make your tile sparkling again.
Leave a comment